| Pagina's in het onderwerp: [1 2] > | Poll: What font do you use when translating scanned documents / non-standard formats? De persoon die dit onderwerp heeft geplaatst: ProZ.com Staff
|
|---|
This forum topic is for the discussion of the poll question "What font do you use when translating scanned documents / non-standard formats?".
This poll was originally submitted by Marie-Hélène Hayles
View the poll here
A forum topic will appear each time a new poll is run. For more information, see: ... See more This forum topic is for the discussion of the poll question "What font do you use when translating scanned documents / non-standard formats?".
This poll was originally submitted by Marie-Hélène Hayles
View the poll here
A forum topic will appear each time a new poll is run. For more information, see: http://proz.com/topic/33629 ▲ Collapse
| | | | | Times New Roman is my default. | Oct 30, 2007 |
It's not always my client's, and their default always trumps my default.
| | | | Paul Dixon 
Brazilië
Local time: 14:58
Portugees naar Engels
+ ...
Verdana is definitely my favourite font, and I normally use size 11 or 12. Of course, if the text asks to keep the original font, I do.
Regarding popular fonts, Verdana and Arial are quite pleasing to the eye, but I don't think too much of Times New Roman.
| | | | | Anything rather than Courier... | Oct 30, 2007 |
...which makes me feel I'm producing an inferior piece of work!
| | |
|
|
|
Steven Capsuto
Verenigde Staten
Local time: 13:58
Lid 2004
Spaans naar Engels
+ ...
| I try to approximate the client's fonts and general layout | Oct 30, 2007 |
It makes editing and proofreading much easier.
[Edited at 2007-10-30 15:15]
| | | |
Steven Capsuto wrote:
It makes editing and proofreading much easier.
[Edited at 2007-10-30 15:15]
But there are limits, I'm quick to draw the line if I feel I'm really crossing into the realm of DTP.
After all, at the end of the day we're selling our time. If I was that interested in charity work, I'd find a better cause.
[Edited at 2007-10-30 15:25]
| | | | | Close to original document | Oct 30, 2007 |
I always try to match fonts and layout with the original document.
Otherwise my favorite font is Arial size 11. I use it for all my letters and invoices. But Times New Roman I don't like at all.
| | | | | Times for proofreading, then the client's font | Oct 30, 2007 |
I find proofreading much easier in Times New Roman.
Somehow typos slip through in Arial, and you can't trust the spellchecker ... Other fonts are tricky too, but it is largely a matter of habit. I find italics especially difficult, but changing the format makes errors stand out.
I do follow the client's formatting in big, complicated jobs, but I sometimes save a backup with the original formatting, then convert to a proofing-friendly format to make sure I have caught AL... See more I find proofreading much easier in Times New Roman.
Somehow typos slip through in Arial, and you can't trust the spellchecker ... Other fonts are tricky too, but it is largely a matter of habit. I find italics especially difficult, but changing the format makes errors stand out.
I do follow the client's formatting in big, complicated jobs, but I sometimes save a backup with the original formatting, then convert to a proofing-friendly format to make sure I have caught ALL the errors. I correct them in the original formatting version, of course!
It's worth it! ▲ Collapse
| | |
|
|
|
Jack Doughty
Verenigd Koninkrijk
Local time: 18:58
Russisch naar Engels
+ ...
In memoriam | Verdana, more often than not | Oct 30, 2007 |
If the font seems immaterial, I use Verdana, but in some cases (legal documents, certificates etc.) Times New Roman seems more appropriate, or I may match the original font if I can.
My rather curious preference for Verdana font size is 9.5. The reason for this is historical: I was doing a regular job with a title line on each sheet which had limits on the maximum and minimum number of words.
While still using a typewriter (no, I don't go back as far as quill pens),
I knew tha... See more If the font seems immaterial, I use Verdana, but in some cases (legal documents, certificates etc.) Times New Roman seems more appropriate, or I may match the original font if I can.
My rather curious preference for Verdana font size is 9.5. The reason for this is historical: I was doing a regular job with a title line on each sheet which had limits on the maximum and minimum number of words.
While still using a typewriter (no, I don't go back as far as quill pens),
I knew that a certain number of characters produced a line of a certain size, and to match what I was used to in Verdana, 9.5 was about right.
[Edited at 2007-10-30 21:20] ▲ Collapse
| | | | | Times New Roman | Oct 30, 2007 |
I suggested this poll because I get quite a few scanned letters to translate which were written in Comic Sans MS, which I find somewhat disconcerting - to me it looks completely unprofessional. So I refuse to use it (although I would if I were specifically asked to, of course!). I've also revised translations written in Courier New, which I find literally unreadable - I have to change it all to another font before I can work on it.
My preference is TNR in 11 or 12, but I'm OK with ... See more I suggested this poll because I get quite a few scanned letters to translate which were written in Comic Sans MS, which I find somewhat disconcerting - to me it looks completely unprofessional. So I refuse to use it (although I would if I were specifically asked to, of course!). I've also revised translations written in Courier New, which I find literally unreadable - I have to change it all to another font before I can work on it.
My preference is TNR in 11 or 12, but I'm OK with Arial (10) or Tahoma or Verdana. ▲ Collapse
| | | | | Comic Sans MS | Oct 30, 2007 |
I use Comic Sans whenever I can, especially when translating legal documents. I think it really lightens up their serious tone a lot.
| | | | LinguaLab.net
Verenigd Koninkrijk
Local time: 18:58
Engels naar Noors
+ ...
I also use Verdana, it's just a personal preference.
| | |
|
|
|
esperantisto
Local time: 20:58
Lid 2006
Engels naar Russisch
+ ...
SITE LOCALIZER | DejaVu Fonts are my choice | Oct 30, 2007 |
Normally, it's DejaVu Mono. Those fonts are far superior to Microsoft's by script/language coverage.
| | | |
I hereby state that I hate, detest and despise Times New Roman font.
I am not sure about the reasons, though.
That is all I have to say now, and my apologies for diverting this honorable thread.
Good day!
Andrés
| | | | Tamer Elzein (X)
Local time: 20:58
Engels naar Arabisch
+ ...
| Arial Unicode MS | Oct 30, 2007 |
Since most of the work I handle needs to be translated into Arabic, using Verdana is a luxury I can't afford.
Actually, I probably wouldn't use Verdana, anyway. It's an amazing font for the Web, but since I started using the ClearType technology, I've come to love the way Serif fonts appear on my laptop screen.
Sometimes, I might use a certain font for proofreading then, when I'm done, I convert the font to my client's preference.
| | | | | Pagina's in het onderwerp: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Poll: What font do you use when translating scanned documents / non-standard formats? | Protemos translation business management system | Create your account in minutes, and start working! 3-month trial for agencies, and free for freelancers!
The system lets you keep client/vendor database, with contacts and rates, manage projects and assign jobs to vendors, issue invoices, track payments, store and manage project files, generate business reports on turnover profit per client/manager etc.
More info » |
| | Wordfast Pro | Translation Memory Software for Any Platform
Exclusive discount for ProZ.com users!
Save over 13% when purchasing Wordfast Pro through ProZ.com. Wordfast is the world's #1 provider of platform-independent Translation Memory software. Consistently ranked the most user-friendly and highest value
Buy now! » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
